Many integrators choose common robots that are not suitable for laser cutting. Inefficiency and poor effect have affected the laser pointer users' perception of this field in the automotive industry. Denied the robot plan. Stäubli believes that excellent integrators choose high-precision robots and integrate them into sophisticated system structures. According to different user products, the basic model evolves into different robot flexible cutting solutions. Combination between multiple machines and platforms.
The level of integration ability of the integrator determines the final cutting effect and efficiency. Germany's JENOPTIK is a laser application integrator of Stäubli. It adopts the TX90 laser cutting robot specially developed by Stäubli, custom light cutting head and unique BIM (Beam-In-Motion) technology. The positioning accuracy of the small hole of the device can reach ± 50μm, and the linear velocity is> 12m / min. If the product output is relatively high, JENOPTIK can provide dual-machine equipment or multi-robot solutions.
The red laser pointer is one of the laser pointers, which emits red laser light, so it is called the red laser pointer. It seems that the functions and performance are a bit worse than that of the green laser pointer. It is suitable for most consumers because it can achieve the same functional effects as other laser pointers even at low retail prices in the market. Class IIIA blue laser pointer has weaker brightness than green laser, but its thermal focusing function (ignition) is the strongest among lasers. The higher the output power, the greater the damage to the eyes, so you must wear special laser protective glasses when using it. In addition, the stability of the blue laser pointer is better than that of the green laser pointer (green light is greatly affected by the weather and may be warmed up to a cold environment). Laser pointers of 5mw or less have been approved for sale in the United States. If it is more than 5mw, special approval is required.
Some local green laser pointer cutting system integrators with strong technical strength are also constantly improving their understanding of robotic laser cutting and their integration capabilities. Shenzhen Han's laser used Stäubli's robot products in the robot laser cutting solution used in the automotive industry. This system contains two mobile working platforms. The robot switches between the workpieces on the two platforms. The non-working mobile platform pushes Come out and feed. The customer of this system is a passenger car manufacturing plant, and the person in charge of the vehicle plant equipment is very satisfied with it. Not only is the cutting effect good, but also the efficiency is high, the double station platform will not waste the time of feeding, this customer has already purchased nearly ten sets Taubir robot equipment. And they plan to redesign a stamping line and replace a die stamping line with a robot flexible production line. The material transfer in the process is also completed by robots. The robot usage of this line may be as high as dozens. The use of robots not only saves costs, but also improves the level of automation. The entire process does not require manual intervention.
It will take some time for various car manufacturers to initially accept the robot flexible laser cutting method, and integrators need to further improve the robot integration capabilities. Improve system accuracy and speed. Especially the security and stability of the system. Let users in the automotive industry gradually begin to adopt robotic flexible laser cutting solutions in batches.