In the indoor type case, you can almost flip a coin. Remember, lasers work both ways. In fact, greens are considered better and more expensive. It's hard to see the red laser sight during the day. Under these conditions, green looks brighter. At the same power, green lasers are more visible than red ones. Red lasers have been around for a long time because engineers figured out how to mass-produce them before they knew anything about green lasers. I hope SPCL doesn't hear this. It might be a good idea to have some movable fabric - some of the photos are bloody. 100MW Green Laser Designator This indicator is still in effect at the beginning of this process and while the use of AB did not damage critical organs, it may never be exactly the same if the ribbon and tube packaging currently used is used in large quantities.
After the red are orange high powered laser Pointers, which are more or less identical to the dark red ones. Yellow laser devices follow, with wavelengths up to 535 nm. Because these are more complex, they are more unstable, require heat stabilizers and require intense cooling. Then there are green lasers, which are more complex because they use laser diodes and require high power. They are not battery-powered like crimson lasers. I like to see how things work and how they are made, and everything I have, have and feel I have should be opened up and examined. This may sound like a lot of risk, but to me it's worth it and, most importantly, you'll see that it doesn't damage key components (although the deal may have better days). I have diodes for the rifle's green laser sight to see if I want to look for a higher power 808 nm laser that can take full advantage of these components.