The fiber laser pointer cutting machine is a new type of cutting equipment developed in the world. It uses a laser to output a laser beam with high energy density and gathers on the surface of the workpiece to instantly melt and vaporize the area of the workpiece that is illuminated by the ultra-fine focus spot. The automatic mechanical cutting is realized by moving the spot irradiation position by the numerical control mechanical system, and the speed is fast and the precision is high.
Compared with ordinary carbon dioxide laser cutting machine, fiber laser cutting machine saves space and gas consumption, and has high photoelectric conversion rate. It is a new product of energy saving and environmental protection, and one of the world's leading technology products.
Fiber laser cutting machine is a laser pointer process revolution of sheet metal processing. It is the "processing center" in sheet metal processing. It is mainly used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, subway parts, automobiles, grain machinery, textiles. Machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, household appliances, craft gifts, tool processing, decoration, advertising, metal processing, kitchen processing and other manufacturing and processing industries.
The self-developed fiber laser cutting machine has good output beam quality, high energy density and power up to 4000W, which can realize high-precision cutting. It can be widely used in the cutting of carbon steel, stainless steel, aluminum alloy and other metal materials. The thickest can be cut 25mm. Carbon steel.
In addition, the laser and cutting processing surface can be customized according to the actual needs of customers, and the power selection of 1500-6000W can basically meet the industrial applications of various working conditions.
The self-developed fiber optic laser pointer cutting machine adopts the gantry type double-drive structure, which runs smoothly and has stable cutting quality. High-strength welded bed, annealing + vibration aging eliminates internal stress and finishes, which better solves the stress caused by welding and processing, thus improving the rigidity and stability of the equipment.
The so-called gantry double-drive structure is a concept relative to a single drive. The traditional single-drive structure only has one motor, which is driven by the screw rod, but the speed is fast but the stability is not high. The gantry double-drive structure adopted by Gree not only has a short acceleration process, but also has a very large improvement in stability and cutting speed. The cutting precision is extremely high with an error of <±0.02 mm.
The self-developed fiber optic laser pointer cutting machine has high-precision gear racks, reducer and other transmission components, equipped with wear-resistant and pressure-resistant guide rails to ensure stable and efficient operation of the machine, maximum acceleration up to 1.2G, fast response work!
The high-speed exchange of the climbing type double working platform saves the refueling time and improves the processing efficiency. More work can be done in the same amount of time. And in the whole work process, the electro-optical conversion rate is high, compared with most domestic machine tools, it is more energy-efficient and more cost-effective!
In addition, the equipment also has a high-rigidity welded bed and high-strength aluminum alloy beams, which are of high quality and long service life. There is no pressure for ten years and eight years. At the same time, due to the excellent configuration of the fiber laser generator, it has almost no loss during use and low noise, realizing clean production.