Free Gifts For Orders Greater Than $100 - Green Laser Pointer

Active Popular Newest

The chiller is also one of the keys to the antifreeze of laser pointer equipment

8.4K

0

For laser tubes. The greater the frequency, the more frequent the water changes. Otherwise, impurities such as calcium and magnesium in the purified water will adhere to the inner wall of the laser pointer tube. Affect the energy of the laser pointer. Therefore, the most important thing is to change the water frequently and clean the water when not in use. The chiller is also one of the key to antifreeze of laser equipment. In the cold winter, many users think that the water temperature will not increase much in cold weather. Therefore, you often forget to change the water, especially in winter, because the outside temperature is very low, and it is difficult to feel the spindle motor heating.

Tags

System

8.4K

0

In addition, antifreeze can be used. It is generally composed of alcohols and water. It is required to have high boiling point and flash point, high specific heat and conductivity, low low temperature viscosity, not easy to foam, and not corrode metal parts, rubber hoses, etc. Adding it to the water tank of the chiller that is matched with the laser equipment can prevent the cooling water from freezing, so that the chiller can start and operate normally in the cold winter. The above is the anti-freezing measures for CO2 laser cutting machines in winter. In order to make your own laser equipment work better in winter. Please master the relevant antifreeze knowledge.

2021-01-23 03:47:14

Your Answer: