Laser Engraving Images
Cleaning and maintenance, good exhaust, and cleaning and maintenance of the machine tool at any time are necessary conditions for the normal operation of the machine tool. Imagine that people's joints are not flexible, how can they act? For the same reason, the guide rail of the machine tool is a high-precision core component. After each work is completed, it must be wiped clean and kept smooth and lubricated; the bearings must also be regularly oiled, so as to make the drive flexible, accurate and extend the service life of the machine tool. Ambient temperature and humidity The ambient temperature should be in the range of 5-35 ° C. Special attention: if used in the environment below freezing point, it must be done: to prevent the circulating water in the laser tube from freezing, and the water must be completely exposed after the machine is stopped; the Laser Engraving Images current must be warmed up for more than 5 minutes before it starts to work, In rainy days and humid environments, the laser power supply needs to be warmed up for a longer time, and the high voltage can only be applied after the humidity has been drained to prevent breakdown of the high voltage circuit.